starting new job...
branch='trunk'
if ! command -v git >/dev/null 2>&1; then
echo 'byggsteg: git is not on this deployment PATH, so the clone cannot be updated' >&2
exit 1
fi
if ! cd "$dir"; then
echo "byggsteg: cannot enter the clone $dir" >&2
exit 1
fi
root=$(git rev-parse --show-toplevel 2>/dev/null)
if [ "$root" != "$(pwd -P)" ]; then
echo "byggsteg: $dir is not a git checkout; remove it and the next run clones it again" >&2
exit 1
fi
if ! origin=$(git remote get-url origin 2>/dev/null); then
echo "byggsteg: $dir has no origin remote to fetch $branch from" >&2
exit 1
fi
before=$(git rev-parse --short HEAD 2>/dev/null) || before=none
attempt=1
while :; do
if GIT_TERMINAL_PROMPT=0 git fetch --quiet origin "+refs/heads/$branch:refs/remotes/origin/$branch"; then
break
fi
if [ "$attempt" -ge 3 ]; then
echo "byggsteg: could not fetch $branch from $origin after 3 attempts; is the branch still there, and is the remote reachable?" >&2
exit 1
fi
echo "byggsteg: fetching $branch from $origin failed; retrying in $((attempt * 2))s" >&2
sleep $((attempt * 2))
attempt=$((attempt + 1))
done
if ! git checkout --quiet --force -B "$branch" FETCH_HEAD; then
echo "byggsteg: fetched $branch from $origin but could not check it out" >&2
exit 1
fi
after=$(git rev-parse --short HEAD)
if [ "$before" = "$after" ]; then
echo "byggsteg: $branch was already at $after"
else
echo "byggsteg: $branch moved from $before to $after"
fi
byggsteg: trunk moved from c774665 to 488a1eaLinux wolk-jjba 7.2.11-gnu #1 SMP PREEMPT_DYNAMIC 1 x86_64 GNU/Linux
commit 488a1ea7178932ef824366d27b70cfd49ec7f3e0
Author: Josep Bigorra <jjbigorra@gmail.com>
Date: Mon Nov 16 14:44:32 2026 +0100
refactor(ui): hot-reload a dock from Rust, and delete dock_item.c
The last piece of the file was the reload -- the sequence of stages a hot reload
runs: re-read the settings and the CSS, drop a pending auto-hide timeout, set the
row's spacing, move the surface to a new edge, rebuild the row and re-sync the
window trackers, apply the mode classes when a mode-relevant setting actually
moved, then put the dock where it belongs. All of it is `rust/src/dock_item.rs`
now, and `src/ui/dock_item.c` is gone: 1922 lines down to a header that stays as
the C-side contract the tests, the bridge and the tracker still call.
Three details worth keeping:
- The mode comparison was `memcmp` over `LambdockShelfParams`. `ShelfParams`
derives `PartialEq`, so it is `!=` now -- the same question, asked of a value.
- `gtk_layer_*` has no Rust binding here and does not need one: the three calls the
dock makes are declared as externs next to the code that makes them, with the
note that a surface that is not a layer surface has nothing to re-anchor.
- The orientation is set through `gtk_orientable_set_orientation` on the row and the
capsule, because a `GtkBox` and a `GtkWidget` are not the same type and the C
said so with a cast.
The weak doubles in tests/test_stubs.c grew the reload's C dependencies --
`dock_read_settings`, `populate_dock_items_for`, `sync_window_trackers`,
`dock_apply_exclusive_zone`, `apply_dock_mode_classes`, `refresh_dock_mode`,
`dock_apply_motion_preference`, `hide_dock` -- which is the seventh time the shared
codegen units have asked, and the same rule every time: weak here, the real
definition wins wherever its file is compiled in.
Suite: 290 Rust tests; clippy clean; 36/38 meson tests, test_dock_item 16/16, the
one failure being icon_zoom's painted_size, which GTK itself reproduces here.
M HACKING.org
M NEWS.org
M meson.build
M rust/src/dock_item.rs
D src/ui/dock_item.c
M tests/test_stubs.cThe Meson build system
Version: 1.9.0
Source dir: /etc/byggsteg/job-clone/lambdock/trunk
Build dir: /etc/byggsteg/job-clone/lambdock/trunk/build
Build type: native build
Project name: lambdock
Project version: 1.4.0
C compiler for the host machine: cc (gcc 14.3.0 "cc (GCC) 14.3.0")
C linker for the host machine: cc ld.bfd 2.44
Host machine cpu family: x86_64
Host machine cpu: x86_64
Compiler for C supports arguments -Wpedantic: YES
Compiler for C supports arguments -Wshadow: YES
Compiler for C supports arguments -Wstrict-prototypes: YES
Compiler for C supports arguments -Wmissing-prototypes: YES
Compiler for C supports arguments -Wredundant-decls: YES
Compiler for C supports arguments -Wimplicit-fallthrough: YES
Compiler for C supports arguments -Wvla: YES
Compiler for C supports arguments -Wundef: YES
Compiler for C supports arguments -Wformat=2: YES
Compiler for C supports arguments -Wformat-security: YES
Compiler for C supports arguments -Werror=implicit-function-declaration: YES
Compiler for C supports arguments -Werror=incompatible-pointer-types: YES
Compiler for C supports arguments -Werror=int-conversion: YES
Compiler for C supports arguments -Wno-overlength-strings: YES
Found pkg-config: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/pkg-config) 0.29.2
Run-time dependency gtk4 found: YES 4.22.1
Run-time dependency guile-3.0 found: YES 3.0.9
Run-time dependency gtk4-layer-shell-0 found: YES 1.3.0
Run-time dependency wayland-client found: YES 1.26.0
Run-time dependency gtk4-x11 found: YES 4.22.1
Library m found: YES
Run-time dependency wlr-protocols found: YES 1.0
Program wayland-scanner found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/wayland-scanner)
Build-time dependency gio-2.0 found: YES 2.86.5
Program glib-compile-resources found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/glib-compile-resources)
Program desktop-file-validate found: NO
Message: desktop-file-validate not found: skipping desktop entry validation
Program appstreamcli found: NO
Message: appstreamcli not found: skipping AppStream metadata validation
Program msgfmt found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/msgfmt)
Program msginit found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/msginit)
Program msgmerge found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/msgmerge)
Program xgettext found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/xgettext)
Program cargo found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/cargo)
Program rust/cargo-build.sh found: YES (/etc/byggsteg/job-clone/lambdock/trunk/rust/cargo-build.sh)
Run-time dependency glib-2.0 found: YES 2.86.5
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency gio-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency gio-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency gio-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Program guile found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/guile)
Program tests/run_scheme_tests.sh found: YES (/etc/byggsteg/job-clone/lambdock/trunk/tests/run_scheme_tests.sh)
Program cargo-clippy found: NO
Message: cargo-clippy not found: skipping the Rust lint check
Build targets in project: 49
Found ninja-1.13.2 at /gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/ninja
ninja: Entering directory `build'
[1/229] Generating wlr-foreign-toplevel-protocol-c with a custom command
[2/229] Generating wlr-foreign-toplevel-protocol-h with a custom command
[3/229] Generating lambdock-resources_h with a custom command
[3/229] Generating lambdock-rust with a custom command (wrapped by meson to set env)
error: failed to calculate checksum of: /etc/byggsteg/job-clone/lambdock/trunk/rust/vendor/system-deps/src/tests/test.tar.gz
Caused by:
failed to open file `/etc/byggsteg/job-clone/lambdock/trunk/rust/vendor/system-deps/src/tests/test.tar.gz`
Caused by:
No such file or directory (os error 2)
[4/229] Generating lambdock-resources_c with a custom command
FAILED: [code=101] liblambdock.a
env CARGO_HOME=/etc/byggsteg/job-clone/lambdock/trunk/build/rust-cargo-home /etc/byggsteg/job-clone/lambdock/trunk/rust/cargo-build.sh /etc/byggsteg/job-clone/lambdock/trunk/rust/Cargo.toml /etc/byggsteg/job-clone/lambdock/trunk/build/rust-target release liblambdock.a
[6/229] Compiling C object lambdock.p/meson-generated_.._lambdock-resources.c.o
ninja: build stopped: subcommand failed.
--------------------------------------------------------------
Maak 0.14.0: the infinitely extensible command runner
Loading tasks from Maak file: /etc/byggsteg/job-clone/lambdock/trunk/maak.scm
Executing Maak tasks: test
--------------------------------------------------------------
=> Running Maak task: test
Build and run the whole test suite headlessly.
The shell wrapper only applies to the first command, so the pipeline is run by
one inner `sh -c' instead of a bare `&&': otherwise `ninja' would execute
outside the Guix environment.
The GTK tests need a display: with none, `gtk_init_check' fails and GLib turns
the resulting GTK warnings into aborts (6 of 7 tests die with SIGTRAP), so the
suite runs on a virtual X server, as in package.nix's checkPhase.`GDK_BACKEND', `GTK_A11Y' and `GSK_RENDERER' are pinned because there is no compositor, no a11y
bus and no EGL under Xvfb; `GTK_A11Y=test' is GTK's own backend for the
accessible-name assertions in the suite.
The build directory is thrown away first: the Byggsteg job clone survives
between jobs, and a tree configured by a different Meson version makes both
`meson setup' and `ninja' fail with 'build data file ... references functions
or classes that don't exist'. Rebuilding from scratch also means the passing
tests are the ones that match the checked out sources.
Execute command:
guix time-machine --channels=channels.scm -- shell -m manifest.scm -- /bin/sh -c 'set -eu; export GTK_A11Y=test GDK_BACKEND=x11 GSK_RENDERER=cairo; rm -rf build; meson setup build; ninja -C build; xvfb-run -a -s "-screen 0 1024x768x24" meson test -C build --print-errorlogs'
Executing: guix time-machine --channels=channels.scm -- shell -m manifest.scm -- /bin/sh -c 'set -eu; export GTK_A11Y=test GDK_BACKEND=x11 GSK_RENDERER=cairo; rm -rf build; meson setup build; ninja -C build; xvfb-run -a -s "-screen 0 1024x768x24" meson test -C build --print-errorlogs'
maak: error: command failed (exit code 101): guix time-machine --channels=channels.scm -- shell -m manifest.scm -- /bin/sh -c 'set -eu; export GTK_A11Y=test GDK_BACKEND=x11 GSK_RENDERER=cairo; rm -rf build; meson setup build; ninja -C build; xvfb-run -a -s "-screen 0 1024x768x24" meson test -C build --print-errorlogs'
hint: Fix the command above, or run `maak --dry-run' to inspect it first.(lambda()
`((task . ("maak-test"))
(project . "lambdock")
(branch-name . "trunk")
(clone-url . "https://github.com/jjba23/lambdock.git")))