lambdock-61c27aa4-cf3b

job failed

starting new job...
rundir='/etc/byggsteg/job-clone//lambdock/trunk succeeded43 lines · 0.6s
branch='trunk'
if ! command -v git >/dev/null 2>&1; then
  echo 'byggsteg: git is not on this deployment PATH, so the clone cannot be updated' >&2
  exit 1
fi
if ! cd "$dir"; then
  echo "byggsteg: cannot enter the clone $dir" >&2
  exit 1
fi
root=$(git rev-parse --show-toplevel 2>/dev/null)
if [ "$root" != "$(pwd -P)" ]; then
  echo "byggsteg: $dir is not a git checkout; remove it and the next run clones it again" >&2
  exit 1
fi
if ! origin=$(git remote get-url origin 2>/dev/null); then
  echo "byggsteg: $dir has no origin remote to fetch $branch from" >&2
  exit 1
fi
before=$(git rev-parse --short HEAD 2>/dev/null) || before=none
attempt=1
while :; do
  if GIT_TERMINAL_PROMPT=0 git fetch --quiet origin "+refs/heads/$branch:refs/remotes/origin/$branch"; then
    break
  fi
  if [ "$attempt" -ge 3 ]; then
    echo "byggsteg: could not fetch $branch from $origin after 3 attempts; is the branch still there, and is the remote reachable?" >&2
    exit 1
  fi
  echo "byggsteg: fetching $branch from $origin failed; retrying in $((attempt * 2))s" >&2
  sleep $((attempt * 2))
  attempt=$((attempt + 1))
done
if ! git checkout --quiet --force -B "$branch" FETCH_HEAD; then
  echo "byggsteg: fetched $branch from $origin but could not check it out" >&2
  exit 1
fi
after=$(git rev-parse --short HEAD)
if [ "$before" = "$after" ]; then
  echo "byggsteg: $branch was already at $after"
else
  echo "byggsteg: $branch moved from $before to $after"
fi


byggsteg: trunk moved from 9ff9d59 to 36d467e
setupuname -a succeeded1 lines · 0.0s
Linux wolk-jjba 7.2.11-gnu #1 SMP PREEMPT_DYNAMIC 1 x86_64 GNU/Linux
setupgit log --name-status HEAD^..HEAD succeeded28 lines · 0.0s
commit 36d467ebb1ff76efbf46751d0b30e0d19ac42070
Author: Josep Bigorra <jjbigorra@gmail.com>
Date:   Mon Nov 16 16:59:30 2026 +0100

    refactor(app): reconciling the docks, as a plan
    
    Reconciling is now two steps, and the first one is a value. `plan_for_file`
    turns (the settings file, its monitor policy, the registered docks, the live
    monitors) into a `FilePlan`: which docks to destroy, which to reload, where to
    spawn, as indices into that snapshot. It takes no widgets, so the three policies
    are unit-tested without a display -- one dock per monitor with the stranded ones
    replaced, one dock on a named connector, one dock with no monitor -- plus the
    documented fallback for a connector that does not exist, and the rule that one
    file's pass never touches another file's docks.
    
    `apply_plan` carries it out, in that order, because a destroy is what makes room
    for a spawn on the same monitor. `sync_docks_with_disk` walks the files and
    delegates: the fallback dock when there is no settings file at all, the fallback
    and the vanished files' docks removed, then one reconcile per file.
    
    src/main.c is 526 lines: the Guile subrs, the two GFileMonitor watchers, the
    monitor hotplug listener, `activate` and `main`.
    
    Suite: cargo 312 passed (both with and without LAMBDOCK_HAVE_X11), clippy clean
    both ways; meson 36 ok, 1 skip, and icon_zoom_unit_tests is the failure it was
    before this change. A live dock reconciles its single settings file, spawns the
    dock on the monitor and builds its 25 items, then quits with no criticals.

M       rust/src/main_app.rs
M       src/main.c
testmaak test failed107 lines · 1.8s
The Meson build system
Version: 1.9.0
Source dir: /etc/byggsteg/job-clone/lambdock/trunk
Build dir: /etc/byggsteg/job-clone/lambdock/trunk/build
Build type: native build
Project name: lambdock
Project version: 1.4.0
C compiler for the host machine: cc (gcc 14.3.0 "cc (GCC) 14.3.0")
C linker for the host machine: cc ld.bfd 2.44
Host machine cpu family: x86_64
Host machine cpu: x86_64
Compiler for C supports arguments -Wpedantic: YES 
Compiler for C supports arguments -Wshadow: YES 
Compiler for C supports arguments -Wstrict-prototypes: YES 
Compiler for C supports arguments -Wmissing-prototypes: YES 
Compiler for C supports arguments -Wredundant-decls: YES 
Compiler for C supports arguments -Wimplicit-fallthrough: YES 
Compiler for C supports arguments -Wvla: YES 
Compiler for C supports arguments -Wundef: YES 
Compiler for C supports arguments -Wformat=2: YES 
Compiler for C supports arguments -Wformat-security: YES 
Compiler for C supports arguments -Werror=implicit-function-declaration: YES 
Compiler for C supports arguments -Werror=incompatible-pointer-types: YES 
Compiler for C supports arguments -Werror=int-conversion: YES 
Compiler for C supports arguments -Wno-overlength-strings: YES 
Found pkg-config: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/pkg-config) 0.29.2
Run-time dependency gtk4 found: YES 4.22.1
Run-time dependency guile-3.0 found: YES 3.0.9
Run-time dependency gtk4-layer-shell-0 found: YES 1.3.0
Run-time dependency wayland-client found: YES 1.26.0
Run-time dependency gtk4-x11 found: YES 4.22.1
Library m found: YES
Run-time dependency wlr-protocols found: YES 1.0
Program wayland-scanner found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/wayland-scanner)
Build-time dependency gio-2.0 found: YES 2.86.5
Program glib-compile-resources found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/glib-compile-resources)
Program desktop-file-validate found: NO
Message: desktop-file-validate not found: skipping desktop entry validation
Program appstreamcli found: NO
Message: appstreamcli not found: skipping AppStream metadata validation
Program msgfmt found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/msgfmt)
Program msginit found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/msginit)
Program msgmerge found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/msgmerge)
Program xgettext found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/xgettext)
Program cargo found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/cargo)
Program rust/cargo-build.sh found: YES (/etc/byggsteg/job-clone/lambdock/trunk/rust/cargo-build.sh)
Run-time dependency glib-2.0 found: YES 2.86.5
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency gio-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency gio-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Dependency gio-2.0 found: YES 2.86.5 (cached)
Dependency glib-2.0 found: YES 2.86.5 (cached)
Program guile found: YES (/gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/guile)
Program tests/run_scheme_tests.sh found: YES (/etc/byggsteg/job-clone/lambdock/trunk/tests/run_scheme_tests.sh)
Program cargo-clippy found: NO
Message: cargo-clippy not found: skipping the Rust lint check
Build targets in project: 49

Found ninja-1.13.2 at /gnu/store/g4q6gg96i463yk5jw7hrw6yvf5168czg-profile/bin/ninja
ninja: Entering directory `build'
[1/139] Generating wlr-foreign-toplevel-protocol-c with a custom command
[2/139] Generating wlr-foreign-toplevel-protocol-h with a custom command
[3/139] Generating lambdock-resources_h with a custom command
[3/139] Generating lambdock-rust with a custom command (wrapped by meson to set env)
error: failed to calculate checksum of: /etc/byggsteg/job-clone/lambdock/trunk/rust/vendor/system-deps/src/tests/test.tar.gz

Caused by:
  failed to open file `/etc/byggsteg/job-clone/lambdock/trunk/rust/vendor/system-deps/src/tests/test.tar.gz`

Caused by:
  No such file or directory (os error 2)
[4/139] Generating lambdock-resources_c with a custom command
FAILED: [code=101] liblambdock.a 
env CARGO_HOME=/etc/byggsteg/job-clone/lambdock/trunk/build/rust-cargo-home LAMBDOCK_HAVE_X11=1 LAMBDOCK_SCHEME_DIR=/usr/local/share/guile/site/3.0 LAMBDOCK_VERSION=1.4.0 /etc/byggsteg/job-clone/lambdock/trunk/rust/cargo-build.sh /etc/byggsteg/job-clone/lambdock/trunk/rust/Cargo.toml /etc/byggsteg/job-clone/lambdock/trunk/build/rust-target release liblambdock.a
[6/139] Compiling C object lambdock.p/meson-generated_.._lambdock-resources.c.o
ninja: build stopped: subcommand failed.


--------------------------------------------------------------

Maak 0.14.0: the infinitely extensible command runner

Loading tasks from Maak file: /etc/byggsteg/job-clone/lambdock/trunk/maak.scm

Executing Maak tasks: test


--------------------------------------------------------------

=> Running Maak task: test

  Build and run the whole test suite headlessly.

The shell wrapper only applies to the first command, so the pipeline is run by
one inner `sh -c' instead of a bare `&&': otherwise `ninja' would execute
outside the Guix environment.

The GTK tests need a display: with none, `gtk_init_check' fails and GLib turns
the resulting GTK warnings into aborts (6 of 7 tests die with SIGTRAP), so the
suite runs on a virtual X server, as in package.nix's checkPhase.`GDK_BACKEND', `GTK_A11Y' and `GSK_RENDERER' are pinned because there is no compositor, no a11y
bus and no EGL under Xvfb; `GTK_A11Y=test' is GTK's own backend for the
accessible-name assertions in the suite.

The build directory is thrown away first: the Byggsteg job clone survives
between jobs, and a tree configured by a different Meson version makes both
`meson setup' and `ninja' fail with 'build data file ... references functions
or classes that don't exist'. Rebuilding from scratch also means the passing
tests are the ones that match the checked out sources.

  Execute command:
guix time-machine --channels=channels.scm -- shell -m manifest.scm -- /bin/sh -c 'set -eu; export GTK_A11Y=test GDK_BACKEND=x11 GSK_RENDERER=cairo; rm -rf build; meson setup build; ninja -C build; xvfb-run -a -s "-screen 0 1024x768x24" meson test -C build --print-errorlogs'

Executing: guix time-machine --channels=channels.scm -- shell -m manifest.scm -- /bin/sh -c 'set -eu; export GTK_A11Y=test GDK_BACKEND=x11 GSK_RENDERER=cairo; rm -rf build; meson setup build; ninja -C build; xvfb-run -a -s "-screen 0 1024x768x24" meson test -C build --print-errorlogs'

maak: error: command failed (exit code 101): guix time-machine --channels=channels.scm -- shell -m manifest.scm -- /bin/sh -c 'set -eu; export GTK_A11Y=test GDK_BACKEND=x11 GSK_RENDERER=cairo; rm -rf build; meson setup build; ninja -C build; xvfb-run -a -s "-screen 0 1024x768x24" meson test -C build --print-errorlogs'
        hint: Fix the command above, or run `maak --dry-run' to inspect it first.
inspect the job's lambda expression
(lambda()
  `((task . ("maak-test"))
    (project . "lambdock")
    (branch-name . "trunk")
    (clone-url . "https://github.com/jjba23/lambdock.git")))